Used Fujikura FSM-70S Fusion Splicer w/CT-07 cleaver. Stock number: FJ70S
Package includes:
- Used FSM-70S Fusion Splicer Machine (NA license. Arc count 76. Total count 6361)
- Used ADC-18 AC Adapter
- Used ACC-14 Power Cord
- Used BTR-09 Battery
- Used Transit Case with Carrying Strap
- New KS-1 Kevlar Scissors
- New FCC2 Fiber Connector Cleaner and Preparation Fluid
- New Sharpie Permanent marker
- New CT-07 Cleaver
- New FO103 Stripper
Financing:
Apply for financing. Low monthly payments.
We accept trade-ins:
We make trades local dealers cannot match. Trade up, trade down with cash-back, or sell your used equipment. Contact us to see what we can do for you!
Warranty:
We offer 30 day warranty. Take the stress out of buying used equipment.
Next-day delivery within USA:
Avoid downtime. Request one-day delivery and get locating package the next day.
We ship worldwide:
We ship worldwide and offer flexible international shipping rates. We work with the freight forwarder of your choice or help you to choose the most suitable one.
Specifications for splicer:
| PARAMETER | VALUE |
| Model | 70S Fusion Splicer |
| Applicable Fibers | Single-mode (G.652 & G.657), Multimode (G.651.1), DS (G.653), CS (G.654), NZDS (G.655 & G.656) and Erbium-doped fiber |
| Cladding Diameter | 80μm to150μm |
| Coating Diameter | 100μm to 1,000μm |
| Fiber Cleave Length | 5 to 16 mm |
| Typical Average Splice Loss | 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS |
| Measured by cut-back method relevant to ITU-T and IEC standards | |
| Splicing Time | Typical 9 seconds with standard single-mode fiber |
| Arc Calibration Method | Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available |
| Splicing Modes | 100 preset and user programmable modes |
| Splice Loss Estimate | Based upon dual camera core alignment data |
| Storage of Splice Result | Last 2000 results to be stored in the internal memory |
| Fiber Display | X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation |
| Magnification | 320X for single X or Y view, or 200X for X and Y view |
| Viewing Method | Dual cameras with 4.7 inch TFT color LCD monitor |
| Operating Condition | 0 to 5,000m above sea level, 0 to 95%RH and -10 to 50°C respectively |
| Mechanical Proof Test | 1.96 to 2.25N |
| Tube Heater | Built-in tube heater with 30 heating modes; auto-start function |
| Tube Heating Time | Typical 14 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves |
| Protection Sleeve Length | 60mm, 40mm, micro |
| Splice/Heat Cycles with Battery | Typical 200 cycles with power save functions activated |
| Power Supply | Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery |
| Terminals | USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03 |
| Wind Protection | Maximum wind velocity of 15m/s. (34 mph) |
| Dimensions | 146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches) |
| Weight | 2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery |
* In Good Condition.
Used Fujikura FSM-70S Fusion Splicer w/CT-07 cleaver. In stock, and job ready.
Stock number: FJ70S
Order Now By Phone Call: 727-492-6587
Sell Or Trade To Us
We make trades local dealers cannot match